trabucco lever fa

Trabucco Competition Pro 1+1/155 is a high-precision technical holdall, designed for anglers who optimize their setup by carrying one primary ready-to-use rod and a second spare. At 155 cm long, this model utilizes the clever 1+1 configuration: it features one contoured "belly" compartment to house a rod rigged with a reel (even large surf sizes) and a second linear compartment for an unrigged rod, banksticks, or tip tubes.

The structure is encased in the renowned waterproof 600-denier fabric of the Competition Pro series, providing a reliable shield against abrasion, sand, and salt spray. The reinforced internal core acts as an anti-crush barrier, preserving the integrity of guides and carbon tips during transit. With compact dimensions of 155x22x17 cm, this holdall offers total protection without the bulk of multi-compartment models, remaining extremely manageable thanks to the adjustable padded shoulder strap and stress-tested oversized zippers.

Main Features

1+1 Configuration: 1 contoured section for a rod-and-reel combo + 1 linear section for a spare rod or accessories.
Full Hardcase Protection: Rigid, padded structure designed to absorb shocks and prevent accidental crushing.
600D Waterproof Fabric: High-density technical material, wear-resistant and easy to wipe clean.
Space-Saving Design: 22 cm width providing XXL protection in a slim, aerodynamic profile.
Professional Hardware: Reinforced zippers with ergonomic sliders and double-stitching at stress points.
Carrying Comfort: Adjustable shoulder strap with non-slip padding for long walks to the spot.
Multi-Technique Versatility: Ideal for 3-section surf rods, rigged bolo rods, or feeder/ledgering tackle.

Recommended For

Surfcasting and Shore Anglers: For those moving with one rod ready to cast and a spare for different distances.
Bolo Rod Specialists: Perfect for carrying rigged rods while shielding them from impacts against rocks or docks.
Tournament Anglers: Excellent for separating top-tier gear into individual rigid cases within a vehicle's boot.
Security & Portability Seekers: The best compromise for those wanting the safety of a rigid tube with the convenience of a shoulder bag.

Titan XR5 Footplate is the essential extension for any angler looking to elevate their XR5 series seatbox to a higher level of comfort and technicality. This footplate is designed to integrate with absolute precision into the seatbox frame, providing a solid and secure base for your feet—crucial for maintaining correct posture during fishing, especially when using a pole or feeder rod.

Crafted from ultra-light yet extremely rigid materials, the footplate follows the Titan series' construction philosophy: reliability and modern design. In addition to improving seating ergonomics, the Footplate drastically increases the overall stability of the station on uneven or muddy ground, supporting the setup with additional 36 mm legs for micrometric leveling.

Thanks to the Titan customization system, adding the footplate does not prevent the stacking of additional modules and drawer units. Match anglers can thus configure their station in a modular way, creating extra space for rig winders and accessories, ready to respond quickly to any unpredictable race conditions.

Main Features

Total Compatibility: Specifically designed for all seatboxes in the Trabucco Titan XR5 series.
Enhanced Stability: Provides a rigid support base that solidifies the entire seatbox structure.
Ergonomics: Enables correct leg positioning, reducing fatigue during long sessions.
Grip Surface: Non-slip texture designed for safety even when the footplate is wet or muddy.
Modularity: Seamlessly integrates with the Titan interchangeable module system.
Materials: High-resistance aluminum and components treated against corrosion.

Recommended For

Match Anglers: Indispensable for those competing where speed and correct posture make the difference.
Pole Anglers: Essential for providing the right leverage point and support when handling long rods.
Full Station Enthusiasts: To transform LT or SD models into a professional "Full Station" setup.

Trabucco Andromeda Surf is a three-section surfcasting rod designed to provide solidity and ease of casting. Built with SHMR carbon blanks, this rod integrates Cross Reinforced technology in the joints: special crossed laminations that quickly dampen oscillations after release, stabilizing the blank and allowing for more precise casting distances.

Sensitivity is managed by a Hybrid (HY) tip, featuring a solid carbon end inserted into a tubular structure. This setup allows for the detection of even the wariest bites without compromising power during loading. To maximize control, the tip is coated with high-visibility white paint, essential for monitoring the rod's action during night sessions.

The technical equipment includes double-leg S-SiC guides with an anti-tangle "K" frame and anti-corrosion treatments, ideal for those fishing in harsh marine environments. The stainless steel and rubber DPS reel seat is sized to accommodate large reels, ensuring absolute stability. The design is completed by the non-slip Sensi Touch grip at the base, ensuring a firm and comfortable hold for better leverage during the cast.

Main Features

Blank: Made of high-resistance SHMR carbon.
Technology: CRC (Cross Reinforced Carbon) joints reinforced against impacts and overloads.
Tip: Hybrid Tip (HY) with solid inserted carbon, ultra-sensitive and reactive.
Visibility: White reflective painted tip for perfect night visibility.
Guides: Double-leg S-SiC with anti-tangle KW frames (Saltwater Resistant).
Reel Seat: Screw-type DPS model with stainless steel and rubber hoods.
Control: Sensi Touch butt grip for optimal handling during the cast.

Recommended For

Surfcasting Enthusiasts: For those seeking a reliable rod capable of handling powerful casts without excessive residual vibrations.
Night Anglers: The high-visibility tip makes it one of the most practical tools for evening sessions.
Durability Seekers: Thanks to CRC reinforcements and anti-corrosion guides, it is built to last despite constant exposure to salt spray.

Trabucco Mantis XSD is the natural evolution of its famous predecessor, significantly improved in terms of lightness and retrieval smoothness. While keeping the eye-catching aesthetics that made it a global success, this 2026 version has been mechanically optimized to provide an even more pleasant and precise fishing experience.

The core of the reel features a new bearing configuration: the 2 Long Life bearings and the one-way roller bearing are now strategically mounted on the central shaft. This technical solution minimizes internal friction, ensuring smooth and consistent rotation. Precision is guaranteed by the One Way Clutch infinite anti-reverse system and a micrometric front drag with oversized discs, capable of handling powerful fish runs with extreme linearity.

The Long Cast Superlight spool, CNC-machined from aluminum, is designed to enhance line release, while the AS (Anti Twist System) line roller works to eliminate line twist. Depending on the size, the Mantis XSD adapts to various techniques: the 4000 and 6000 sizes are equipped with an oversized T-Knob handle to offer superior leverage during heavy retrievals.

Main Features

XSD Evolution: Lighter and smoother than the previous version.
Mechanics: 2 Long Life bearings + 1 roller bearing on the central shaft.
Anti-Reverse: One Way Clutch system for instant rotor locking.
Casting: CNC Machine Cut aluminum spool with Long Cast profile.
Drag: Micrometric front drag with oversized discs.
Line Management: AS Anti-Twist line roller to reduce wind knots.
Handle: Balanced Power Fight model; T-Knob grip on 4000 and 6000 sizes.

Recommended For

Bolognese and Light Spinning Anglers: Ideal for those seeking a reliable, lightweight reel with a very precise drag.
Feeder and Beach Ledgering Enthusiasts: The larger sizes (4000/6000) provide the necessary power to manage feeders or beach weights.
Value-Oriented Anglers: A proven reel that combines modern technology with the solid construction quality guaranteed by the Trabucco brand.

Trabucco Krius XSW is a front drag reel engineered for anglers who demand power and total protection against the elements. Featuring an innovative ultra-light hybrid body, it combines a central aluminum frame (for unbeatable structural rigidity) with a carbon rotor, which reduces weight and enhances rotational inertia.

The internal mechanics are built to last: the main shaft and drive gear are made of stainless steel, supported by 6 double-shielded ball bearings that ensure constant smoothness and corrosion resistance. A standout feature of the XSW series is the fully sealed drag system, 100% waterproof against water and dust, ensuring consistent performance even after intensive use in saltwater environments.

Retrieval power is maximized by the CNC handle that screws directly into the drive gear (Power Gear), eliminating mechanical play and providing direct force transmission during the fight. The V-Spool aluminum design, paired with the anti-twist titanium line roller, allows for superior casting distances while minimizing the risk of wind knots.

Main Features

Hybrid Structure: Aluminum main body and carbon rotor for lightness and strength.
Stainless Mechanics: Main shaft and drive gears made of high-grade stainless steel.
Bearings: 6+1 double-shielded stainless steel bearings.
Sealed Drag: 100% Waterproof system, protected from water, salt, and sand.
Power Transmission: Screw-in CNC handle directly on the main gear with Fighting Knob.
Casting: V-Spool aluminum design for long and accurate casts.
Line Roller: AS Titanium anti-twist roller and oversized Powerbail.
Security: Instant anti-reverse system (no back-wind lever for increased durability).

Recommended For

Spinning Anglers (Salt & Fresh): Ideal for those seeking a tireless reel capable of handling heavy lures and hard-fighting predators like Seabass, Bluefish, or Pike.
Bolognese and Feeder Specialists: Perfect for those wanting a smooth yet extremely solid tool, capable of maintaining drag precision for years.
Harsh Condition Anglers: The sealed drag makes it the perfect companion for fishing in rain, heavy surf, or dusty environments.

Trabucco Coralia Teknic Boat is a top-tier boat rod, developed for the most demanding techniques such as deep bottom fishing (bolentino) and medium-heavy drifting. The heart of this rod is the Super Slim blank crafted from CXN Nano Tek carbon with LRC (Low Resin Content) technology. This low-resin material results in a stiff, incredibly reactive, and perfectly balanced tool, featuring a progressive taper that guarantees total control during the toughest fights.

Action continuity is ensured by X-Joints, reinforced with 45° carbon, which eliminate flat spots and allow for a harmonious curve throughout the blank. The rod is extremely versatile thanks to the three interchangeable fiberglass tips (Soft, Medium, Stiff) included. These tips are built using the Spiral Guide System and finished with high-visibility dual-color paint to never lose touch with the bait or the most subtle bites.

The hardware is premium, featuring a full Fuji setup: the K-Series frame guides are specifically treated against salt and corrosion, while the stainless steel reel seat is oversized to accommodate large reels. Comfort is guaranteed by the non-slip Sensor Grip handle and the rounded rubber butt cap, designed to facilitate leverage during long retrieves.

Main Features

Blank Material: CXN Nano Tek Carbon with LRC (Low Resin Content) technology.
Profile: Super Slim blank with progressive taper, stiff and reactive.
Joints: X-Joint technology with 45° reinforcements for an uninterrupted curve.
Tips: 3 interchangeable fiberglass tips (Light, Medium, Power) with Spiral Guide system.
Guides: Fuji O-Ring with K-Series anti-corrosion frames (Saltwater resistant).
Reel Seat: Stainless steel Fuji reel seat with rubber inserts for heavy-duty reels.
Handle: Non-slip Sensor Grip with a rounded rubber butt cap.
Visibility: Dual-color high-visibility fluorescent painted tips.

Recommended For

Bottom Fishing Specialists: Anglers seeking precision and sensitivity in deep-water fishing with interchangeable tips.
Drifting Anglers: Excellent for drifting for medium to large predators where power reserve and reactivity are essential.
Premium Gear Seekers: Anglers who want a lightweight "Super Slim" tool that is indestructible under tension, equipped with original Fuji components.

Trabucco Swims Deep Quiver is a two-section bottom fishing rod, available in 300 and 400 gr versions, featuring a conical butt section designed for optimal balance and significant power reserve. Built with CX-1 Micro Pitch carbon, it incorporates spigot joints made with X-Joint and CX Joint technology, utilizing biaxial material positioned at ± 45° for increased structural strength without the need for additional bindings. It comes supplied with two interchangeable Fiberglass tips with different actions (Light and Medium), developed with STS Spiral Tip System technology for superior sensitivity. The Fuji MN guides with Aluminium Oxide stones ensure reliable line flow. The ergonomic graphite reel seat has a screw-down hood for secure attachment. The handle features a special non-slip paint for optimal grip and enhanced rod protection. The rounded rubber butt cap provides better leverage during fights.

Key Features:

Two-section bottom fishing rod (300 and 400 gr).
CX-1 Micro Pitch carbon construction.
X-Joint and CX Joint spigot joints with ± 45° biaxial material.
Two Fiberglass tips (Light and Medium) with STS Spiral Tip System.
Fuji MN guides with Aluminium Oxide stones.
Ergonomic graphite reel seat with screw-down hood.
Handle with non-slip paint.
Rounded rubber butt cap.

Recommended for:

Anglers who practice bottom fishing from a boat.
Those seeking a powerful and well-balanced rod for various depths.
Anglers who appreciate the sensitivity of Fiberglass tips.

Trabucco Heraklion PWR Boat is a two-section bottom fishing rod featuring a smart telescopic butt section, allowing anglers to adjust the rod's length during fishing. Constructed with CX2 Carbon Nano Tek – LRC (Low Resin Content) carbon, it offers an optimal combination of lightness, power, and responsiveness. It comes supplied with two Fiberglass tips with different actions (Light and Power), enabling anglers to tackle various fishing situations and species. The Fuji MN guides with Aluminium Oxide stones ensure reliable and long-lasting line flow. The handle is coated with a special material positioned at a 45° angle for an ergonomic and secure grip. The cross-shaped rubber butt cap facilitates stable positioning in boat rod holders and provides increased leverage during fights with challenging prey.

Key Features:

Two-section bottom fishing rod with telescopic butt section.
CX2 Carbon Nano Tek – LRC construction.
Two Fiberglass tips with Light and Power actions.
Fuji MN guides with Aluminium Oxide stones.
Handle with 45° angled coating.
Cross-shaped rubber butt cap.

Recommended for:

Anglers who practice bottom fishing and light drifting from a boat.
Those seeking a versatile rod with adjustable length.
Anglers who need power and sensitivity for various species.

Trabucco Lever FA is a front drag reel designed to offer a versatile and performing fishing experience. It stands out for its lightweight graphite body and rotor design, which help reduce fatigue during long fishing sessions.

Equipped with 5 Long Life System ball bearings, it offers smooth and fluid retrieval. The Infinite anti-reverse - One Way Clutch System ensures a quick and secure hookset.

The micrometric front drag with oversized discs allows for precise and powerful adjustment, ideal for adapting to different fishing situations and prey. The V-spool design spool in super lightweight aluminum promotes long and accurate casts, while the AS (Anti Twist System) roller and the Powerbail help prevent tangles and line twists.

The Power Fight aluminum handle with ergonomic soft touch knob offers a comfortable and secure grip during the fight. A spare graphite spool is included, useful for always having a spool with a reserve line available or to quickly change the type of line.

The Trabucco Lever FA is a reel suitable for various fishing techniques, such as spinning, feeder, bolognese and bottom fishing, representing an excellent choice for anglers looking for a versatile and reliable product with a good value for money.

Key Features:

Body and rotor: In lightweight graphite design.
Bearings: 5 Long Life System.
Anti-reverse: Infinite (One Way Clutch System).
Drag: Micrometric front with oversized discs.
Spool: V-spool design in super lightweight aluminum.
Roller: AS (Anti Twist System).
Bail: Powerbail.
Handle: In Power Fight aluminum with soft touch knob.
Spare spool: In graphite.

Recommended for:

Anglers who practice various fishing techniques (spinning, feeder, bolognese, bottom fishing).
Anglers looking for a lightweight, smooth and durable reel.
Anglers who want a product with a good value for money.

Trabucco Hazen CX is a high-end front drag reel designed to offer exceptional performance to the most demanding anglers. It stands out for the innovative body design (DSC - Double Shaft Construction) which, in addition to increasing rigidity and compactness, offers greater power, reduces torsion and increases the life of the reel.

The super lightweight CX carbon body and rotor contribute to reducing the overall weight of the reel without compromising robustness. The 5 double shielded stainless steel bearings guarantee smoothness and fluidity during use, while the unidirectional roller bearing offers an immediate response to the hookset.

The reel lacks the anti-reverse release lever for greater sensitivity and resistance. The V-Spool super lightweight aluminum spool promotes long and accurate casts. The micrometric front drag with stainless steel discs and high resistance fibers offers precise and powerful adjustment, ideal for tackling fights with large fish. A distinctive feature is the completely sealed drag (100% Water & Dust Proof) that protects it from water and dust, ensuring consistent performance over time.

The turned handle, directly engaged on the drive wheel, with ergonomic soft touch knob, offers a comfortable and secure grip during recovery.

The Trabucco Hazen CX is an ideal reel for anglers looking for a high-quality, reliable and performing product for various fishing techniques.

Key Features:

Body: DSC - Double Shaft Construction.
Material: CX carbon for body and rotor.
Bearings: 5 double shielded stainless steel.
Anti-reverse: Unidirectional roller bearing.
Spool: V-Spool super lightweight aluminum.
Drag: Micrometric front, sealed (100% Water & Dust Proof).
Handle: Turned with ergonomic soft touch knob.

Recommended for:

Experienced anglers who practice various fishing techniques.
Anglers looking for a light, smooth, powerful and reliable reel.
Anglers who want a high quality product with innovative technologies.

Trabucco Helium FB is a high-end front drag reel designed to offer exceptional performance to the most demanding anglers. It stands out for the use of cutting-edge materials and technologies, which make it a light, smooth, powerful and reliable reel.

The extra light and high resistance body and rotor are made of pure CX carbon, a light and resistant material that contributes to reducing the overall weight of the reel without compromising robustness. The 10 double shielded stainless steel ball bearings guarantee smoothness and fluidity during use, while the unidirectional roller bearing offers an immediate response to the hookset.

The ultralight spool with ball bearing supporting the rotation promotes long and accurate casts, while the stainless steel gears and pinion ensure greater durability and resistance to wear. The reel lacks the anti-reverse release lever for greater sensitivity and resistance.

The oversized Powerbail with titanium Anti-Twist roller prevents line twisting and contributes to a smooth and trouble-free retrieve. The micrometric front drag with fully sealed carbon and duralumin discs allows for precise and powerful adjustment, ideal for tackling fights with large fish.

The turned handle, directly engaged on the drive wheel, with extra light CX carbon knob, offers a comfortable and secure grip during recovery. The aluminum spool with "V" shaped upper edge (V-Spool) promotes long distance casts. A protective neoprene case is supplied to protect the reel during transport and storage.

The Trabucco Helium FB is an ideal reel for anglers looking for a high-quality, reliable and performing product for various fishing techniques.

Key Features:

Body and rotor: Extra light in pure CX carbon.
Bearings: 10 double shielded stainless steel ball bearings.
Spool: Ultralight with ball bearing.
Gears and pinion: In stainless steel.
Anti-reverse: Absence of release lever.
Bail: Powerbail with titanium Anti-Twist roller.
Drag: Micrometric front with sealed carbon and duralumin discs.
Handle: Turned with CX carbon knob.
Spool: In V-Spool aluminum.
Case: Protective in neoprene.

Recommended for:

Experienced anglers who practice various fishing techniques.
Anglers looking for a light, smooth, powerful and reliable reel.
Anglers who want a high quality product with innovative technologies.

Trabucco Adeon FD is a front drag reel designed to offer a versatile and performing fishing experience. It stands out for its lightweight graphite body and rotor design, which help reduce fatigue during long fishing sessions.

Equipped with 5 Long Life System ball bearings, it offers smooth and fluid retrieval. The infinite anti-reverse - One Way Clutch System ensures a quick and secure hookset. A distinctive feature is the absence of the anti-reverse release lever, a choice that increases the sensitivity and strength of the reel.

The micrometric front drag with oversized discs allows for precise and powerful adjustment, ideal for adapting to different fishing situations and prey. The V-spool design spool in super lightweight aluminum promotes long and accurate casts, while the Powerbail and AS (Anti Twist System) roller help prevent tangles and line twists.

The Power Fight aluminum handle with ergonomic soft touch knob offers a comfortable and secure grip during the fight. A spare graphite spool is included, useful for always having a spool with a reserve line available or to quickly change the type of line.

The Trabucco Adeon FD is a reel suitable for various fishing techniques, such as spinning, feeder, bolognese and bottom fishing, representing an excellent choice for anglers looking for a versatile and reliable product.

Key Features:

Body and rotor: In lightweight graphite design.
Bearings: 5 Long Life System.
Anti-reverse: Infinite (One Way Clutch System).
Drag: Micrometric front with oversized discs.
Spool: V-spool design in super lightweight aluminum.
Bail: Powerbail.
Roller: AS (Anti Twist System).
Handle: In Power Fight aluminum with soft touch knob.
Spare spool: In graphite.

Recommended for:

Anglers who practice various fishing techniques (spinning, feeder, bolognese, bottom fishing).
Anglers looking for a lightweight, smooth and durable reel.
Anglers who want a product with a good value for money.

The new Trabucco Heraklion X Deep are special rods for deep-sea fishing, structured to handle loads suited to the depths (from 500 to 1300 grams of lead). Blanks in 2 sections of equal length, made of High Modulus CX-1 Micro Pitch carbon, with Super Progressive technology. Joint and Twist Free to counteract twisting. Special spiral wrapping in the terminal part of the tip (Spiral Tip System). EVA handle with long fore grip for excellent fighting leverage, Heavy Duty stainless steel screw reel seat.